Control Elements And Connections; General; Control Panel - Fronius Acctiva Smart 25 A Manual De Instrucciones

Control elements and connections

General

Please note:
as a result of firmware updates, you may find that there are functions available on your
device that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
Danger from incorrect operation.
This can result in severe personal injury and damage to property.
▶
▶

Control panel

(1)
(4)
56
WARNING!
Do not use the functions described here until you have read and completely unders-
tood these operating instructions.
Do not use the functions described here until you have fully read and understood all
of the Operating Instructions for the system components, in particular the safety
rules.
(2) (3)
Stop/Start key
- For interrupting and resuming charging
- Confirming selections, e.g. after the charging voltage has been selected
from 6, 12 or 24 V using the Up/Down keys
No. Function
(1) Graphic display
(2) Menu key
-
(3) Up/Down keys
-
-
-
(4)
Select the desired setting, e.g.
Ah
Select the desired operating
mode, e.g. 'Charging' or 'Bat-
tery changing'
Alter the setting that has been
selected by the Menu key (2)
After connecting to a new bat-
tery:
ability to manually select the
charging voltage from 6, 12 or
24 V