Device options
General informa-
The device options allow the following to be configured:
tion
-
-
-
-
-
-
Selecting device
options
Configuration
NOTE!
Danger when selecting and using individual charging lead lengths.
This can result in damage to property.
▶
▶
The following parameters can be configured to create an individual standard:
Charging lead length:
-
-
Initial values:
Language
Selection of language for user guide
Graphic display contrast
Configuration
an individual standard may be set
Factory setting
restores all device options to the factory settings
With Acctiva Professional 35A only:
Activate/deactivate Expert mode
Information
provides information on the
hardware and software version
total Ah charged
total operating time
Use the up/down keys to select the device options
1
The user accepts full responsibility for shortening the charging leads supplied and
specifying the appropriate individual charging lead lengths.
The manufacturer shall not be held liable for any damage arising from such actions.
1 - 10 m (3 ft. 3.37 in. - 32 ft. 9.7 in.),
in 0.5 m (1 ft. 7.69 in.) - adjustable stages
The following lengths may be requested in the scope of supply:
2.5 / 5 m (8 ft. 2.43 in. / 16 ft. 4.85 in.)
77