Össur Cheetah Xtreme Instrucciones Para El Uso página 7

Coronal plane
• Introduce appropriate socket abduction/adduction using a jig.
• Determine appropriate internal or external socket rotation.
• Outset the foot module approximately 12 mm (1/2")
• Achieve proper height approximately 38mm (1 ½") taller than the
sound side to compensate for vertical compression.
note: The recommendations for bench alignment are used as a starting
point. Definitive alignment will be achieved during dynamic assessment
using the alignment adapter.
CuttING Foot moduLE
• Ensure athlete has enough clearance during knee flexion.
• Trim foot module to the top end of the laminating connector.
• Cut foot module using a hack saw or band saw.
NIkE SPIkE Pad (Figure 1 & 2)
• Sand the bottom surface of the foot module
• Bond the Nike Spike Pad using contact cement or industrial strength
glue
• Follow glue manufacturer bonding instructions
6