FujiFilm SonoSite PowerPark Manual Del Usuario página 6

2 Wheel the stand backward into the dock. See
The stand module (on the underside of the stand) snaps into place as it connects with the dock, and the
connection indicator glows green.
Figure 2 Wheel the stand into the dock to connect (shown with the H-Universal Stand).
To undock the stand
1 Make sure the AC power cord is disconnected from the system stand.
2 Wheel the stand away from the dock. The connection indicator turns off.
To manually connect to AC power
If necessary, you can manually connect to AC power, for example, if you need to use the system despite a
depleted battery.

Connect the system power cord to the AC power cord socket on the stand module and to the electrical
outlet.
WARNING
Caution
4
To avoid the risk of electrical shock, make sure the AC power cord is disconnected
from the PowerPark stand module whenever the stand is docked.
To avoid a possible trip hazard, do not connect to AC power manually if the stand is
docked.
Figure 2 on page 4.
PowerPark User Guide