Technical Specifications; Regulations And Standards; Charger; Battery - Tractel dynafor HHD Manual De Instalación, De Utilización Y De Mantenimiento

Model
Number of sensors at input
Display size
Battery life
RF (radio frequency)
technology
RF radio power output
Weight
IP rating
Operating temperature
Display unit material
Batteries

Charger

Dimensions (see figure 4 and 5)
Height
Width
Depth

11. Regulations and standards

11.1. Charger
The charger included in the delivery complies with:
European standards
Directive 2014/30/EU
Reference of standards:
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN63000-3-3:2013
EN62368-1 2014+A11:2017
International standards
UL62368-1:2014 Ed. 2
CSA C22.2#62368-1:2014 Ed. 2
47 CFR FCC Part 15 Subpart B:2017
ANSI C63.4:2014
AS/NZS 62368.1:2018
AS/NZS 3112:2017
AS/NZS CISPR 32:2015

11.2. Battery

The battery included in the product complies with:
International standards

10. Technical specifications

mm
h
2.4 GHz – 2,4835 GHz owner, range up to 400 m in open air
dBm
kg
°C
Rechargeable battery, ENIX, LP906090 6,000 mAh 3.7 V
mm
HHD
4 maximum
13 mm over a single-sensor main screen
48
9.5
0.45
IP65
-20 °C to +50 °C
ABS V0
MK-Q181EX charger
149.3 product / 152.5 hull
95.3 product / 105 hull
26.6 product / 40 hull
IEC62133-2:2017
UN38.3

11.3. HHD display unit

Device full protected by double or
reinforced insulation.
The product described in this manual complies with the
following:
European standards
Directive 2014/53/EU (RED)
Reference of radio standards
EN300440 V2.1.1
EN300328 V2.2.2
ETSI 203367 V1.1.0
Reference of health standards
EN62479 (2010)
Reference of EMC standards
EN61326-1 (2013)
EN301 489- 1 & 17
Reference of electrical safety standards
IEC/EN61010-1 (Amd 1 Ed. 3)
Australian and New Zealand standards
Reference of electrical safety standards
AS/NZ61010-1
GB
19