Markings; Associated Equipment; Use; Battery - Tractel dynafor HHD Manual De Instalación, De Utilización Y De Mantenimiento

The dynafor™ HHD then immediately indicates the load
applied to the sensor(s) associated with it.

3.3. Markings

A
Front panel
B
ON/OFF button
C
Tare button
D Peak load button
E OK button
F Left and right arrow buttons
G Up and down arrow buttons
H Serial number
I QR code
J Product brand
K LCD screen
L
Name of manufacturer
M
USB connector
N
Charger unit MK-PQ181EU 100-240 V ~50/60 Hz
0.5 A Max
O EU, UK, US plugs
P USB cable, type C to A

4. Associated equipment

The product is compatible with the following equipment:
Sensors:
• dynafor™ Pro, offering 0.2% (MR) precision, and a
capacity range from 1 to 250 t
Dynafor™
Pro 1t
Pro 3.2t
Pro 6.5t
Pro 15t
Pro 25t
Pro 50t
Pro 100t
Pro 250t
• dynafor™ Expert, offering 0.1% (MR) precision, and a
capacity range from 0.5 to 10 t
Dynafor™
Expert 0.5t
Code
293369
293379
293389
293399
293409
293419
293429
293439
Code
293299
Expert 1t
Expert 2t
Expert 3.2t
Expert 5t
Expert 6.3t
Expert 10t
• Electronic sensor paired with a dynafor™ Transmitter
WL, allowing any electronic sensor with mV/V output
to be interfaced with the Tractel
Other display devices:
• Additional dynafor™ HHD hand held device for
displaying the measurement on several devices.
Code: 293609 when purchased simultaneously with a
dynafor™ Expert or Pro sensor
Code: 293449 when purchased separately
• AL128 large display unit for high visibility, 128 mm
high digits with wireless communication up to 200 m.
Code: 293489
Threshold safety management module:
• dynafor™ monitoring unit (DMU) offering the same
functionalities as the dynafor™ HHD hand held
device and allowing up to 5 relays to be controlled.
Code: 293479
Software:
• Loader software for downloading the data saved on
the dynafor™ HHD to a computer.
Code: 293509
• Monitoring software allows values to be displayed,
saved and analysed live for up to 8 sensors. Requires
the dynafor™ HHD hand held device.
Code: 68968

5. Use

The supervisor must ensure that the operator has
reviewed this installation, operation and maintenance
manual before they use the device.

5.1. Battery

The 3.7 V rechargeable battery is factory-fitted.
Fully charge the battery before using the product for the
first time.
Use the charger supplied with the dynafor™ HHD for
any recharging (fully recharged in 3 h).
The battery can only be changed by Tractel
authorised repairer.
293309
293319
293329
293339
293349
293359
range of accessories.
®
or an
®
7
GB