Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONTENTS
Chap.
Topic ..................................................................................................................................... Page
1.
GENERAL SAFETY PRECAUTIONS ....................................................................................... 26
2.
TECHNICAL CHARACTERISTICS ........................................................................................... 27
3.
3.1 Checking the opening ........................................................................................................... 28
3.2 Fitting the uprights ................................................................................................................ 28
3.3 Assembling the crosspiece .................................................................................................. 28
3.4 Assembling the counterweights ........................................................................................... 28
3.5 Assembling the emergency release lever ............................................................................ 28
3.6 Installing the photocells (when necessary) ........................................................................... 28
3.7 Installing the safety edge ..................................................................................................... 28
4.
4.1 Control panel ......................................................................................................................... 29
4.2 Connecting the control panel / automation ........................................................................... 29
4.3 Safety photocells ................................................................................................................... 29
5.
5.1 49E - connections ................................................................................................................. 30
5.2 47E (inverter) - connections .................................................................................................. 34
6.
AdjUSTING ANd STARTING
6.1 Checking the movement direction ......................................................................................... 38
6.2 Adjusting the wire edge ......................................................................................................... 38
7.
TROUBLESHOOTING .............................................................................................................. 39
8.
MAINTENANCE ........................................................................................................................ 40
This installation manual is intended for professionally competent personnel only.
The installation, the electrical connections and the settings must be completed in conformity with good workmanship
and with the laws in force.
Read the instructions carefully before beginning to install the product. Incorrect installation may be a source of danger.
Packaging materials (plastics, polystyrene, etc) must not be allowed to litter the environment and must be kept out of the
reach of children for whom they may be a source of danger.
Before beginning the installation check that the product is in perfect condition.
Do not install the product in explosive areas and atmospheres: the presence of flammable gas or fumes represents a serious
threat to safety.
Before installing the door, make all the structural modifications necessary in order to create safety clerance and to guard
or isolate all the compression, shearing, trapping and general danger areas.
Check that the existing structure has the necessary strength and stability.
The safety devices must protect against compression, shearing, trapping and general danger areas of the motorized door.
Display the signs required by law to identify danger areas.
Each installation must bear a visible indication of the data identifying the motorised door.
Before connecting to the mains check that the rating is correct for the destination power requirements.
A multipolar isolation switch with minimum contact gaps of 3 mm must be included in the mains supply.
Check that upstream of the electrical installation there is an adequate differential switch and a suitable circuit breaker.
Ensure that the motorised door has an earth terminal in acwireance with the safety adjustements in force.
The manufacturer of the door declines all responsability in cases where components which are incompatible with the safe
and correct operation of the product only original spare parts must be used or whenever modifications of any nature are
made that have not been specifically authorised by the manufacturer.
For repairs or replacements of products only Entrematic Group AB original spare parts must be used.
The fitter must supply all information corcerning the automatic, the manual and emergency operation of the motorised door
or gate, and must provide the user the device with the operating instructions.
Optional accessory
All right reserved
All data and specifications have been drawn up and checked with the greatest care. The manufacturer cannot however take
any responsibility for eventual errors, omissions or incomplete data due to technical or illustrative purposes.
0DT827 2014-06-13
C
Safety Confort
- 26 -
T
Safety Top
Publicidad
Capítulos
Tabla de contenido
