Leister GEOSTAR G5 Instrucciones De Servicio página 28

Working Display Overview
Machine Setup
Unit:
Setting the unit used
(metric/imperial) for Unit
Speed, Unit Heat, and Unit
Force
Unit Speed:
Individually setting the unit
used for speed (metric/
imperial)
Unit Heat:
Individually setting the
unit used for heat (metric/
imperial)
Unit Force:
Individually setting the unit
used for force (metric/
imperial)
LCD Contrast:
Adjusting the LCD contrast
LCD Backlight:
Setting the display backg-
round illumination
Key Backlight:
Setting the keyboard
background illumination
28
Welding Data Record
Date & Time:
Setting the date and time
Data Recording:
The welding data is logged
when "Data Recording" is
activated.
Factory setting deactivated
Seam Naming:
When "Seam Naming"
is activated, the "Seam
Name" is attached to the
file name.
Factory setting deactivated
Seam Name:
Entering a name affix
Init. Value Record.:
Setting the threshold
value for the welding data
record
Alarm:
When "Alarm" is activa-
ted, the actual values are
monitored with the alarm
limit values, shown on the
display, and recorded.
Factory setting activated
Audible Alarm:
When "Audible Alarm"
is activated, an acoustic
signal is emitted if the
actual value exceeds or
falls below the alarm limit
value.
Factory setting activated