Leister GEOSTAR G5 Instrucciones De Servicio página 42

The employee must then perform the following tasks:
• An invitation mail will be sent to the e-mail address indicated.
The user receiving the invitation must activate the link contained in the e-mail. By doing so, he accesses the
registration page.
• Once on the registration page, he must proceed as follows:
- If the user received the invitation mail via his Microsoft, Google+ or Facebook user account, he must click on
the corresponding account icon and log in there.
- If the user received the invitation mail via the e-mail address of his existing myLeister user account, he must
log in directly with his user name and password.
This action completes the registration procedure for the new user.
- In all other cases, the user selects "Sign up now" and completes the registration procedure.
In the window displayed, the following information must be entered:
– "Email Address": Enter the e-mail address to which the confirmation e-mail was sent.
– Click on "Send verification code". Check the mailbox of the e-mail address indicated.
– Enter the code indicated in the e-mail received and press "Verify code" to complete the procedure.
– "New Password": Assign your password.
– "Confirm New Password": Enter the selected password again here.
– "Given name": Enter your first name here.
– "Surname": Enter your surname here.
– "Displayname": Enter your first name and surname here.
– "Industry sector": Enter the industrial sector in which your company is active here.
– Click on "Create" to complete the procedure.
Removing users:
As the administrator, you can remove users from your joint cloud.
• Click on "User administration".
• Click on the user name that you wish to remove from the joint cloud.
• Click on "Delete" to complete the procedure.
The removed user no longer has access to the data in the joint cloud. The data created by the user remain.
Logging out:
You must log out if another employee wishes to work with the app at the workstation using his user account.
Changing users
Perform the following steps to change users:
• Click on the menu with the user name.
• Click on "Sign out".
• The start screen is displayed.
• Log in using your user name and password.
Work mode Local
The local work mode is only available in terminals which have updated a LQS installation with local data on the
myLeister app.
If you work in local work mode, you do not need to log in as a user.
Important:
In this work mode, your data are only located on your workstation.
Create a regular back-up of your workstation.
42