Door Section Identifi Cation - Wayne Dalton 8000 Instrucciones De Instalación Y Manual Del Usuario

Package Contents Continued...
(2) 1/4"- 20 HEX 1/4"- 20 FLANGE HEX
NUTS NUTS (AS REQUIRED)
1/4"- 20 X 9/16" LARGE HEAD RIBBED
TRACK BOLTS (AS REQUIRED)
1/4"- 20 X 11/16" SELF DRILLING
SCREWS (AS REQUIRED)
(2) 1/4" X 2- 1/2" CARRIAGE BOLTS
Door Section Identification
The BOTTOM SECTION can be
Tools Needed:
identifi ed by the factory attached
bottom astragal, or by the bottom
bracket warning labels on each end
stile. This section is always the 1st
section on four and fi ve section doors.
The LOCK SECTION may have a yellow
and black warning label on the right
side of the section. This section is
always the 2nd section on four and fi ve
section doors.
The INTERMEDIATE I SECTION may
have a warning label attached to either
right or left hand endstile of the section.
This section is always the 3rd section
from the bottom of the door.
The INTERMEDIATE II SECTION is
always the 4th section on fi ve section
door.
The TOP SECTION is always the 4th
section on four section door and the 5th
section on fi ve section door.
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
(2) 3/8"- 16 5/16"- 18 HEX NUTS
HEX NUTS (AS REQUIRED)
1/4"- 20 X 9/16" TRACK
BOLTS (AS REQUIRED)
(2) 3/8"- 16 X 3/4" 3/8"- 16 X 1-1/4" HEX HEAD
TRUSS HEAD BOLTS
1/4"- 14 X 5/8" SELF TAPPING
SCREWS (AS REQUIRED)
1/4"- 20 X 5/8" CARRIAGE
BOLTS (AS REQUIRED)
BOLTS (AS REQUIRED)
(2) 1/4" X 2-3/4" CARRIAGE BOLTS
TOP SECTION
INTERMEDIATE II SECTION (5 SECTION DOORS ONLY)
WARNING LABEL
INTERMEDIATE I SECTION
LOCK SECTION
BOTTOM BRACKET
WARNING LABELS
BOTTOM SECTION
ASTRAGAL
(2) 1/4"- 20 X 5/8" TAMPER
RESISTANT SCREWS
1/4"- 20 X 7/8" SELF DRILLING
SCREWS (AS REQUIRED)
5/16" X 1- 5/8" HEX LAGS (AS REQUIRED)