Swing Away Hangers - Ki Mobility Catalyst 5Vx Manual De Instrucciones

V. SET UP & USE OF YOUR WHEELCHAIR
F. Swing Away Hangers
WARNING: Ensure hangers are locked in place before using or riding wheelchair. Unlocked
hangers while using or operating the chair could result in a fall or loss of control.
1. Installation
a. Place swing-away pivot saddle into the receiver on front frame tube with the footrest facing
either inward or outward from the frame (Fig. 7:A).
b. Rotate the footrest so that it aligns with the frame until it locks into place in the latch block (Fig.
7:B).
2. Swinging the footrest away
a. Push release latch toward the frame.
b. Rotate footrest outward or inward as desired.
3. Removal
a. To remove the footrest, push release latch toward the frame.
b. Lift the footrest straight upward to remove. You may also swing the footrest inward or outward
before lifting it off.
Fig. 7
A
19
B