Troubleshooting - Doro PhoneEasy 410gsm Manual De Instrucciones

Phone.cannot.be.switched.on
Battery.charge.low
Battery.incorrectly.installed.
Failure.to.charge.the.battery
Battery.or.charger.damaged
Charger.incorrectly.connected.to.
phone.or.power.socket
Standby.time.decreases
Battery.charge.capacity.too.low
Too.far.from.base.station,.phone.is.
constantly.searching.for.signal
Failure.to.place.or.receive.calls
Call.barring.activated
PIN.code.not.accepted
Wrong.PIN.code.entered.too.many.
times
English

Troubleshooting

Connect the power adapter and
charge the battery for hours.
Check the installation of the
battery.
Check the battery and charger.
Check the charger connections.
Install a new battery.
Searching the network consumes
battery power. Find a place with a
stronger signal, or temporarily turn
off the phone.
Deactivate call barring. If this does
not solve the problem, contact the
network operator.
Enter the PUK code to change the
PIN code, or contact the network
operator.
37