Installation; Installing The Sim Card And Battery - Doro PhoneEasy 410gsm Manual De Instrucciones

Note!
Turn.off.the.phone.and.disconnect.the.charger.before.
removing.the.battery.cover .
Installing.the.SIM.card.and.battery
The SIM card holder is located behind the battery.
1 . Remove the battery cover by pressing it carefully down and
sliding away from the emergency call key.
2 . Remove the battery if it is already installed.
3 .
Press lightly on the cardholder and carefully slide it towards
the emergency call key.
4 .
The SIM card holder can now be folded into an upright position.
5 .
Placing the SIM-card on the marked area of the
compartment. Make sure that the SIM card's contacts are
facing downwards and that the cut-off corner is placed
accordingly with the marked area. See picture. Take care not
to scratch or bend the contacts on the SIM card.
6 .
Fold the SIM-card holder down and carefully slid it away from
the emergency call key until it "clicks" into place.
7 .
Insert the battery by sliding it into the battery compartment
with the contacts facing towards the emergency call key.
8 .
Replace the battery cover until it "clicks" into place.
English

Installation

3