Emerson HF948BS02 Manual De Instrucciones página 8

3. Ceiling Fan Assembly
3.9
Install one non-reversible blade assembly onto the motor
housing using two spring washers and two
M6 x 1/2" screws, supplied (per blade) (Figure 9).
Repeat this procedure for each of the three blade
assemblies.
Tighten each blade screw to secure each blade assembly
to the motor housing.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flanges when installing the blades, balancing the
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
(Continued)
Figure 9
8
M6 x 1/2" SCREW
(2 PER BLADE)
SPRING WASHER
(2 PER BLADE)
BLADE
ASSEMBLIES (3)
BLADE GASKETS (3)
U.L. Model No.: HF948 & HF956