How To Hang Your Ceiling Fan; Flat Washers; Lock Washers - Emerson HF948BS02 Manual De Instrucciones

WARNING
!
The fan must be hung with at least 10' of clearance from
floor to blades (Figure 10).
WARNING
!
Your support beam or joist must be secure and capable
of withstanding a load of at least 50 pounds.
WARNING
!
Read and follow instructions carefully. Failure to comply
with instructions could result in risk of fire, electric
shock, fan falling and injury to persons.
WARNING
!
J-Hook must be supported by building structure.
4.1
Attach the appropriate J-hook to the building structure
On Steel Beam - Locate and drill a 13/32" diameter hole in
member.
the beam (Figure 11). Use a flat washer, lock washer and
hex nut on both sides of the beam. Position the J-hook so
that the hook extends 2-1/2" out of outlet box. Securely
CAUTION: When the threaded bolt hook is used, be
tighten both hex nuts (Figure 11).
careful to securely tighten with supplied lockwashers
and hex nuts.

4. How to Hang Your Ceiling Fan

10 FOOT
MINIMUM
Figure 10
STEEL BEAM
HEX NUT
LOCK WASHER
FLAT WASHER
FLAT WASHER
LOCK WASHER
HEX NUT
J-HOOK
Figure 11
Please contact 1-800-654-3545 for further assistance
9
CEILING
FLOOR
STEEL BEAM
OUTLET BOX
2-1/2"
emersonfans.com
U.L. Model No.: HF948 & HF956