Troubleshooting - Emerson HF948BS02 Manual De Instrucciones

WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
!
TROUBLE
1. Fan will not start.
1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan,
2. Fan sounds noisy.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Screws securing fan blade flanges to
3. Fan wobbles
excessively.
1. Setscrews in motor coupling are loose.
2. Setscrew in hanger ball / hanger pipe
3. Hanger bracket and / or ceiling outlet
4. Fan blades out of balance.

9. Troubleshooting

PROBABLE CAUSE
or loose switch wire connections in the
upper canopy.
motor hub are loose.
assembly is loose.
box is not securely fastened.
SUGGESTED REMEDY
1. Check main and branch circuit fuses or circuit
breakers.
2. Check all wire connections on the fan
WARNING: Turn off the electricity before
for loose wires.
attempting to service the ceiling fan.
!
1. Attach blades to fan before operating.
2. Check to make sure all screws in motor housing
are snug (not over-tight).
3. Check to make sure the screws which attach
the fan flanges to the motor hub are tight.
WARNING: Turn off the electricity before
attempting to service the ceiling fan.
!
1. Tighten both setscrews securely in the motor
coupling.
2. Tighten the setscrew in the hanger ball / hanger pipe
assembly.
3. Tighten the hanger bracket screws to the outlet
box, and / or secure outlet box.
4. Interchanging an adjacent (side-by-side) blade
pair can redistribute the weight and result in
smoother operation.
Please contact 1-800-654-3545 for further assistance
19
emersonfans.com
U.L. Model No.: HF948 & HF956