Adjusting The Brewing Temperature - Function Setting 4 - melitta CAFFEO Manual De Instrucciones

Display
• Press the on/off button
→
Depending on the selection 1 to 4 bean symbols
mation. The appliance is in stand-by mode again.
Adjusting the brewing temperature – function setting 4
Adjust the brewing temperature as follows to meet your requirements:
The brewing temperature is factory-set to level 2 (medium).
Prerequisite: The appliance must be in stand-by mode.
→
The on/off button
•
Simultaneously press the button for single-cup dispensing
ton for steam dispensing
•
Press the button for single-cup dispensing
possible brewing temperatures.
→ The button for single-cup dispensing
→
Your selection is indicated via the bean symbols
Display
Time
1 hour
2 hours
4 hours
8 hours
to confirm the selected time.
will be illuminated red.
, until the four buttons are faintly illuminated.
is brightly illuminated.
Brewing temperature
low
medium
high
will be flashing as confir-
and the but-
, to switch between three
in the display.
61