Setting Switch-Off Rinsing; Setting The Brewing Temperature; Care And Maintenance; Cleaning Surfaces - melitta Latticia OT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81

Care and maintenance

Display
Water hardness
soft, descale after 150 litres
medium, descale after 100 litres
  
hard, descale after 70 litres
     
very hard, descale after 30 litres
     
flashing
no
A water filter is used. Adjustment is not
coffee beans
possible.

6.3 Setting switch-off rinsing

The appliance performs rinsing when
switched on and off.
We recommend that you do not perma-
nently deactivate the switch-off rinsing
function.
1.
   Press the "Water/Service" button
for longer than 2 seconds.
2.
  Press the "Water/Service"
  
button repeatedly until the Drip tray
display lights up.
Press the "Brewing Strength"
3.
  
button to activate or deactivate the
switch-off rinsing.
4.
  Press the "Water/Service" button
for more than 2 seconds to save the
setting and exit service mode.
Press any direct key to exit service mode
without saving the setting.
Display
no coffee beans
6.4 Setting the brewing
temperature
The brewing temperature influences the
flavour of the coffee beverage.
1.
   Press the "Water/Service" button
for longer than 2 seconds.
2.
  Press the "Water/Service" but-
  
ton repeatedly until the Steam Dispens­
ing display lights up.
26
Switch-off rinsing
activated
deactivated
Press the "Brewing Strength"
3.
  
button repeatedly until the desired
brewing temperature is set.
4.
  Press the "Water/Service" button
for more than 2 seconds to save the
setting and exit service mode.
Press any direct key to exit service mode
without saving the setting.
Display
Brewing temperature
Low
Medium
  
High
     
7 Care and maintenance
Regular cleaning and maintenance of the
appliance ensures the consistent high
quality of your beverages.
Important! Unsuitable cleaning agents
can damage the appliance. Only use the
recommended cleaning agents.

7.1 Cleaning surfaces

Use a soft, damp cloth and a little washing
up liquid to clean the surfaces. Remove
external soiling immediately.
After you have emptied the drip tray and
the coffee grounds container, rinse them
and, if necessary, also clean them with a
soft, damp cloth and a little washing-up
liquid.
You can remove residue from the coffee
beans in the bean container with a soft
cloth. The cloth needs to be dry.

7.2 Cleaning the brewing unit

You should clean the brewing unit every
week.
1. Remove the cover by reaching into the
handle recess and pulling the cover to
the side.
2. Press and hold the red lever on the
brewing unit handle and turn the
handle clockwise until it engages at the
stop.
3. Pull the brewing unit out by the handle.

Publicidad

Tabla de contenido
loading

Tabla de contenido