EB TECHNOLOGY START S10 Instrucciones Y Advertencias Para El Instalador página 31

3.6 Connection of the COURTESY LIGHT
To activate the courtesy light function, as shown in the picture S03
13 14 15 16 17
+
-
3.7 Connection of the LAMP
13 14 15 16 17
+ -
To activate the function "lamp during pause time" put S 05 at 1, to deactivate the function put S05 at 0.
3.8 PRE-LIGHTING
To increase or reduce pre-lighting time, put T 15 and T 16 as follow:
Set up
T 15
T 16
3.9 Connection of a 24 light when the gate is open and when it is moving
13 14 15 16 17
+ -
Set up
18
S 03 1
T 18
18
Set up Val
S 05 1
Description
Pre-lighting time
when CLOSED
Pre-lighting time
when the gate is OPEN
18
Set up
S 07
Val Description
Courtesy light in the
LAmP output
Working time
Courtesy light
Put the set up S25 at 1, if you use a lamp without flashing light, otherwi-
se put the S25 at 0.
Set up
S 25
Description
The light is working in the
Lamp
pause time, too.
in pause time
(Standard value 0)
Set up from 0 a 10 s
Standard Value 2 s
Set up from 0 a 10 s
Standard value 2 s
Value Description
1
Fix light
0
Flashing
In the terminal board 17 and 14
tension is available up to 255s
after. Standard value 0s
Can be set up from 0 to 255 s
Standard value 120s
Value Description
1
Activate the Lighting
0
Deactivate the lighting
The Fix light indicates the gate
opens.
The output light is flashing
light
(standard version)
7
Standard