EB TECHNOLOGY START S10 Instrucciones Y Advertencias Para El Instalador página 40

16
5.4 Memorization of the remote controls
This function can memorize one or more remote controls. It is sufficient that the receiver is compatible with the most bran-
ded remote controls in the market, once you memorized the first remote control, the next codes should be of the same type.
If it is a 12V remote control ( for example dip-switch) it will be memorized only 12 bits remote control.
START REmOTE Control
C 01
1
2
P1
3
PARTIAL OPENING
C 02
1
2
P1
3
6 mEmORIZATION and PROGRAm of the WORKING TImE
This function can fastly and easily ad just the working time to open and they can be changed as shown in the next para-
graph.
WORKINg time memorization
6.1
1 2
1
R 01
2
3
P1
4 2
1
5a
5b
P1
7
Press P2 and P3 on C01
Confirm the operation with P1
When the remote control has been memorized,
see SUCC on the DISPLAY.
Press P2 and P3 on C02
Confirm the operation with P1
Press the button of the remote control.
When the remote control has been memorized,
see SUCC on the DISPLAY
The gate has to be closed
Press P2 and P3 until you see R01
Confirm with P1.
The gate will open and close separatelly from the motors.
If the limit switches or the obstacle detection are available,
the control unit will do a complete cycle.
If the limit switches are not available, press P1.
If the safety will not work, repeat the operation again.