CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
1
UNDER
PULSE
COLOR
MUTING
DEGAUSS
SCAN
CROSS
OFF
SLOT 1
SLOT 2
SLOT 3
POWER
A
B
C
D
E
F
VOLUME
MENU
CHECK
SCREENS
ASPECT
MARKER
AREA
INPUT SELECT
(Front view of DT-V1910CG
shown)
1
Tally lamp
Lights when the tally control signal is ON.
• Set the MAKE/TRIGGER terminal's tally control in the
REMOTE (external control) terminal setup menu.
The lamp color can be set to red or green.
• To set the color, use TALLY SELECT in the "FUNCTION
SETTING" setup menu or MAKE/TRIGGER in the
REMOTE (external control) terminal setup menu.
For details, refer to Page 19 and 23.
2
PHASE adjustment knob
Adjusts picture hue.
• Turn the knob to the left to make the picture redder, and
turn it to the right to make the picture greener.
3
CHROMA adjustment knob
Adjusts picture color density.
• Turn the knob to the left to make the picture color
lighter, and turn it to the right to make the picture color
deeper.
BRIGHT adjustment knob
4
Adjusts picture brightness.
• Turn the knob to the left to make the picture darker, and
turn it to the right to make the picture brighter.
CONTRAST adjustment knob
5
Adjusts picture contrast.
• Turn the knob to the left to make the picture contrast
lower, and turn it to the right to make the picture
contrast higher.
6
VOLUME buttons
Adjusts the speaker volume.
• Pressing this button displays the VOLUME level bar on
the screen. Pressing the button again allows you to
adjust speaker volume.
4
2
3
4
5
7
6
8
11 12 13 14
UNDER
PULSE
COLOR
MUTING
DEGAUSS
SCAN
CROSS
OFF
MENU
SCREENS
ASPECT
AREA
VOLUME
CHECK
MARKER
9
6
10
15 16 17
7 MUTING button
Pressing this button mutes the output sound.
• To cancel "MUTING ON" (no sound), press MUTING
button again, or press the VOLUME "–" or "+" buttons.
NOTE:
When a menu or setting item (such as MAIN MENU, SETUP
MENU, sub-menu, or VOLUME bar) is displayed on the screen,
this button functions as a control button for the menu screen. In
this case, it will not mute the sound when pressed.
8
EMBEDDED AUDIO channel switch button
Press this button while the VOLUME bar is
displayed on the screen to change the input
sound channel.
• When the
button is pressed, the next highest
channel is selected.
• When the
button is pressed, the next lowest channel
is selected.
NOTES:
Switchable channels correspond with the group selected in the
"E.AUDIO GROUP" of the "FUNCTION SETTING" setup menu.
* Valid when an input card compliant with EMBEDDED AUDIO is
installed.
9
Menu select buttons
Selects menu screen items or set-up menu
screen.
10
MENU button
Displays, adjusts or closes a menu screen.
DEGAUSS button/lamp
11
Press the DEGAUSS button. The button lights
and degaussing is performed automatically.
• When the degaussing is completed, the light goes off.
19 20
18
SLOT 1
SLOT 2
SLOT 3
A
B
C
D
E
F
INPUT SELECT
POWER