Transport And Storage; Requirements For Product Use - Festo HGPLE Serie Instrucciones De Utilizacion

HGPLE
3

Transport and storage

• The storage location should fulfil the following conditions:
– Cool
– Dry
– Shaded
– Corrosion resistant
4

Requirements for product use

• Remove transport fixtures (e.g. transparencies and cardboard).
The packaging is intended for recycling.
• Use the product in original status.
Unauthorised modifications are not permitted.
• Follow the warnings and notes on the product and in the relevant operating instructions.
• Observe the details on the rating plate.
• Avoid corrosive ambient conditions (e.g. ozone).
• The following substances must not come into contact with the HGPLE:
– Corrosive coolant
– Grinding dust
– Glowing sparks
– Glowing chips
– Water
• Take the tolerance of the tightening torques into account. Unless otherwise specified, the tolerance
of the tightening torques is ± 20 %.
Festo – HGPLE – 1405a English 19