WIRING
WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead
wires from the fan. If your house wire is larger than 12-gauge or there is more than one house
wire to connect to the two fan lead wires, consult an electrician for the proper size wire
connectors to use.
CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is
present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
NOTE: This fan is remote control adaptable (remote control not included).
1.
Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c)
that fits your situation and make appropriate wiring
connections as follows: [IMPORTANT: For each
wire connection below, use one of the wire
connectors (CC) provided, making sure to screw
wire connector (CC) on in a clockwise direction.]
1a. FAN AND LIGHT CONTROLLED BY PULL
CHAINS: Connect BLACK and BLUE wire from
fan to BLACK wire from ceiling. Connect WHITE
wire from fan to WHITE wire from ceiling.
Connect GREEN wire from fan (on mounting
bracket (A) and downrod (O)) to BARE/GREEN
wire from ceiling.
1b. FAN CONTROLLED BY PULL CHAIN,
LIGHT BY WALL SWITCH: If you intend to
control the fan light with a separate wall switch,
connect BLACK wire from fan to BLACK wire
from ceiling. Connect BLUE wire from fan to the
BLACK (or RED) wire from the independent
wall switch for the light. Connect WHITE wire
from fan to WHITE wire from ceiling. Connect
GREEN wire from fan (on mounting bracket (A)
and downrod (O)) to BARE/GREEN wire from
ceiling.
FAN AND LIGHT CONTROLLED BY PULL CHAINS
1a
FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH
1b
Lowes.com/harborbreeze
10
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
WHITE
BLACK
BLACK (WALL SWITCH)
WHITE
GROUND/GREEN (BARE)
WHITE
WHITE