Tabla de contenido
Publicidad
Description of Device
– See illustration 1
1.1 Push button
1.2 Room Off button
1.3 Neck loop
1.4 Microphone
1.5 Charging indicator
1.6 Charger connector
1.7 Jack plug
read these instructions carefully before you start using the device
intended use
This device is intended for use in transmitting audio from a mobile phone
to wireless hearing aids during a phone conversation, and for listening to
music from an audio source. The device can also be used as a headset.
note: The device uses a standard 4-pole jack which is common in newer
mobile phones. If your mobile phone or audio source uses a different
configuration, it may not work with this product.
Accessories
– See illustration 2
2.1 Charger
2.2 Plug (four region-specific versions)
Place the appropriate plug version on top of the charger as illustrated (1)
and slide it on (2).
chArging
– See illustration 3
3.1 Connect charger to device
3.2 Plug charger into wall socket
3.3 Red light: charging, green light: fully charged
Battery life: 40 hours streaming, 4 months standby.
how to use
– See illustration 4
4.1 Join the two neck loop parts
4.2 Plug the jack cable into the mobile phone or an appropriate audio
device
243
Publicidad
Tabla de contenido
