Menu Control Basics; Setting The Unit Of Measure - Leica GEOVID HD-B3000 Instrucciones

EN

MENU CONTROL BASICS

The following applies for all settings:
– The main menu consists of four
Meter display (
Zeroing Distance (
Format ( ). Please read the relevant sections
AbC
in this manual for details on their function.
– The main menu and the individual setting options
appear in a continuous loop, which means that
all items/settings can be reached by pressing
the button repeatedly.

SETTING THE UNIT OF MEASURE

Your Leica Geovid HD-B/HD-R can be set to impe-
rial units of measure (
sure ( ), i.e. Yards & Inches/Fahrenheit/Inches of
EU
Mercury for Distance/Temperature/Air Pressure,
or Meter & Centimeter/Celsius/Millibar.
This setting also encompasses the units of mea-
sure of the holdover, ballistic curves and zeroing
distance. Your Leica Geovid HD-B/HD-R is set to
yards ex works.
44
: Yard/
items
), Ballistics Curve (
EU.US baLL
) and Ballistic Output
SId
) or metric units of mea-
US
Setting
1. Press and hold the secondary/menu button
(≥ 3 s).
),
• appears (flashing).
EU.US
2. Press the main/trigger button
preferred unit of measure.
= display in yards
US
= display in meters
EU
Note
The current setting is always visible in the display:
M
(for meters) or
to the digits displayed.
3. Save your setting by briefly pressing the sec-
ondary/menu button.
• The saved setting is initially lit continuously as
confirmation, then the display switches to the
next menu item ("
display disappears if no other settings are made.
1 to select your
Y
(for yards) appears in addition
" = Ballistics Curve). The
bALL
2