Setting The Ballistic Curve - Leica GEOVID HD-B3000 Instrucciones

EN SETTING THE BALLISTICS CURVE
Start with step 1 if you are working with the menu
controls for the first time or with step 3 if you have
just set the unit of measure and the display
still flashing.
1. Press and hold the secondary/menu button
(≥ 3 s).
• appears.
EU.US
2. Press the secondary/menu button 1 time
(< 2 s).
• The display switches to
Curves).
3. Press the main/trigger button
• The display switches to
– or
US1
–
EU1
Note
When a memory card is inserted,
before EU1/US1.
50
is
bAll
2
(= Ballistics
bALL
.
1
appears
CArd
4. Select the desired ballistics curve by pressing
the main/trigger button repeatedly, i.e.
– to or
US1 US12
– to , or
EU1 EU12
OFF if you want to have the distance displayed
without point of impact correction
–
(AbC).
5. Save your setting by briefly pressing the sec-
ondary/menu button.
• The saved setting lights up for 4 s as confirma-
tion, then the display initially switches to
then disappears if no other action is taken.
Once a ballistics curve is set, the range value is
first displayed for 2 s after each distance measure-
ment is taken, followed by the calculated correc-
tion value for 6 s.
and
SId