Default Method; Copy Method - Xylem TitroLine 7000 Manual De Instrucciones

160
4.2

Default method

The «Default methods» item of the device contains a series of ready-made standard methods which can be
conveniently selected (Fig. 69).
Fig. 69
Once the selection made, you are directly prompted for the input of the method name (Fig. 70).
Fig. 70
The standard name may be adopted or modified.
Subsequently, you will be taken to «Change method parameters».
Please continue at this point with  4.6 Change Method Parameters.
4.3

Copy Method

Methods can be copied or stored with a new name (Fig. 71). If you select this function, the current method will be
copied and you can include a new name.
Fig. 71
A new name with the suffix [1] is assigned automatically in order to avoid the existence of two methods having
the same name. Subsequently, you will be taken to <Change method parameters>.
Please continue at this point with  4.6 Change Method Parameters.