Titration With External Piston Burettes/Titrators - Xylem TitroLine 7000 Manual De Instrucciones

206

Titration with external piston burettes/titrators

5.2.1
Only dynamic and linear titrations to pH / mV with external burets can be performed!
KF-, Dead stop (µA)- and endpoint titration to pH/mV can´t performed with an external burette.
®
As an example, we perform a pH titration on EQ with an external TITRONIC 500:
From the main menu: Select <EDIT> followed by «New method» and confirm with <ENTER/OK>. Enter as
method name e.g. "Ext. titration to EQ" on. Go to the «Titration parameters» and confirm the selection with
<ENTER/OK> (Fig. 183).
Fig. 183
Select «Titration adress» (Fig. 184).
Fig. 184
Confirm with <ENTER/OK> (Fig. 185).
Fig. 185