Calibration (Cal-Menü) - Xylem TitroLine 7000 Manual De Instrucciones

151
The result will be displayed at the end of the titration (Fig. 42).
Fig. 42
<MODE> can be used to view the titration curve or further resuts (Fig. 43).
st
The pH und mV titration curves will show the measurement curve (blue) and the 1 derivation (red).
The values and the location of the equivalence point are identified directly in the curve itself.
Fig. 43
If a printer is connected, the results will either be printed according to the settings made for the method, or else
they will be memorised in the form of a PDF- and CSV-file file on a connected USB stick. If no printer or USB
stick is connected, the bottom left corner of the display (Fig. 43) will show a message.
<ESC> will take you back to the main menu where you can start the next titration immediately.
Calibration (CAL-Menü)
3.6.2
If you are on the main menu (Fig. 44), calibration is started by pressing <CAL>.
Fig. 44