Festool WTS 150/7 E Manual De Instrucciones Original página 12

- Clean tool regularly of dust accumulations in
the motor housing.
Wear protective goggles.
8 Accessories, tools
Use only original Festool accessories and Festool
consumable material designed for this machine
because these system components are designed
specifi cally for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
9 Maintenance and care
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation. The tool is fi tted with special mo-
tor brushes with an automatic cut-out. When the
brushes become worn the power supply is shut off
automatically and the tool comes to a standstill.
10 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
11 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note). Damage caused by, in
particular, natural wear, overloading, incorrect
handling, or damage caused by the operator, or
damage caused through use of the equipment con-
trary that specifi ed in the Operating Instructions, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore, dam-
age caused by the use of non-original accessories
and consumable materials (e.g. sanding pads) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to the
supplier or an authorised Festool Customer Serv-
ice workshop. Keep the Operating Instructions,
Safety Instructions, Spare Parts List and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
12