Troubleshooting - GYS FLASH 8.12 Manual De Uso

Translation of the original instructions
• Estimated charge time
Battery capacity
Charging time 20% >>> 80%
• Protections :
The GYSFLASH 8.12 and 12.12 have several features to protect them against short-circuits or polarity inversions.
They have an anti-spark feature which prevents sparks whilst connecting the device to the battery. This charger has
double insulation and is compatible with vehicle's onboard electronics.
The GYSFLASH is fitted with an integrated temperature probe that ensures that the charging current is adapted to the ambient
temprature to prevent internal electronics' overheating.

TROUBLESHOOTING

Symptoms
1
The indicator blinks.
2
The indicator is on.
The indicator stays on even after pres-
3
sing the button.
4
The indicator blinks.
5
The indicator stays on.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
GYSFLASH 8.12 / 12.12
GYSFLASH 8.12
20Ah 50Ah 100Ah 160Ah
2h 5h 9h 14h
Causes
• Polarity inversion
• Battery voltage is too high
• Clamps in short-circuit
Charge failure, battery non recoverable.
Thermal protection.
Charger in sleep mode.
Charge interrupted by pressing the
button.
GYSFLASH 12.12
20Ah 50Ah 100Ah 160Ah
1h 3h 5h 9h
• Check that the clamps are properly connected.
• Check that it is a 12V battery.
Change the battery and press
charge.
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
Press the button
charger to exit sleep mode.
Press again to restart the charge.
EN
250Ah
13h
Remedies
to restart a
or connect a battery to the
9