Tuner; Listening To The Radio - Pioneer DVH-P7000R Manual De Operación

Tuner

Listening to the radio

These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 20.
This product's AF (alternative frequencies
search) function can be switched on and off. AF
should be off for normal tuning operation (refer
to page 23).
1
( ) indicator
STEREO ST
Shows that the frequency selected is being
broadcast in stereo.
2
indicator
BAND
Shows which band the radio is tuned to, MW,
LW or FM.
3
indicator
PRESET NUMBER
Shows what preset has been selected.
4
indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
1 Press to select the tuner
SOURCE
Press until you see
SOURCE
• Pressing on the head unit also per-
SOURCE
forms the same operation.
2 3
1
4
.
displayed.
Tuner
2 Use to adjust the sound level.
VOLUME
Press to increase or decrease the vol-
VOLUME
ume.
• Rotating on the head unit also
VOLUME
increases or decreases the volume.
3 Press to select a band
BAND/ESC
Press until the desired band is dis-
BAND/ESC
played, , ,
FM1 FM2 FM3
• Pressing
BAND/ESC
performs the same operation.
4 To perform manual tuning, press 1 or
¡ with quick presses.
The frequencies move up or down step by step.
2 3
• Pressing or on the head unit also per-
forms the same operation.
5 To perform seek tuning, press and hold 1
or ¡ for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
1 or ¡ with a quick press.
• If you press and hold 1 or ¡ you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
2 3
• Pressing or on the head unit also per-
forms the same operation.
Note
• When the frequency selected is being broad-
cast in stereo the
STEREO
light.
.
for FM or .
MW/LW
on the head unit also
(ST) indicator will
En
Section
03
19