Setting The Dab Priority Function; When It Is On; When It Is Off; Switching Auto Pi Seek - Pioneer DVH-P7000R Manual De Operación

Section
Initial Settings
11

Setting the DAB Priority function

When a hide-away DAB tuner (GEX-P700DAB) is
connected, you can set the product in this mode
so that the interruption of traffic information or
news flash from the hide-away DAB tuner takes
precedence over this product's RDS traffic
announcement or news flash function.

When it is on

During DAB reception, when the selected ser-
vice component supports road traffic flashes
and transport flashes, reception is not inter-
rupted by this product's RDS traffic announce-
ments.
Likewise, when the selected service component
supports news flashes, reception is not inter-
rupted by this product's RDS news flashes.

When it is off

Interruption is by the first received news flash or
traffic information from this product's RDS
tuner or the hide-away DAB tuner.
1 Press to select
F
Press repeatedly until
F
the display.
• Pressing
FUNCTION
performs the same operation.
on or off with E or e.
2 Select
DAB
Pressing E or e will switch
between on and off and that status will be dis-
played (e.g.,
DAB Priority :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
80 En
.
DAB
appears in
DAB Priority
on the head unit also
DAB Priority
).

Switching Auto PI Seek

The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press to select
F A-PI
Press repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
on or off with E or e.
2 Select
A-PI
Pressing E or e will switch
on and off and that status will be displayed (e.g.,
).
Auto PI :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.

Switching the warning tone

If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press to select
F WARN
Press repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
on or off with E or e.
2 Select
WARN
Pressing E or e will switch
on and off and that status will be displayed (e.g.,
).
Warning :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
.
appears in the
Auto PI
on the head unit also
between
Auto PI
.
appears in the
Warning
on the head unit also
between
Warning