Scanning Cds And Tracks; Pausing Cd Playback - Pioneer DVH-P7000R Manual De Operación

Multi-CD Player

Scanning CDs and tracks

While you are using
T.SCAN
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
(multi-CD player repeat), the beginning
D.SCAN
of the first track of each disc is played for about
10 seconds.
1 Select the repeat range.
Refer to Repeating play on page 54.
2 Press to select
F SCAN
Press until appears in the display.
F Scan
• Pressing
FUNCTION
performs the same operation.
3 Press E to turn scan play on.
appears in the display. The first 10
Scan :ON
seconds of each track of the present disc (or the
first track of each disc) is played.
• Pressing 5 on the head unit also performs
the same operation.
4 When you find the desired track (or disc)
press e to turn scan play off.
appears in the display. The track (or
Scan :OFF
disc) will continue to play.
• If the display has automatically returned to
the playback display, select
pressing (
F FUNCTION
• Pressing ∞ on the head unit also performs the
same operation.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
(disc repeat), the
.
on the head unit also
again by
SCAN
on the head unit).

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press to select
F PAUSE
Press until appears in the display.
F Pause
• Pressing
FUNCTION
performs the same operation.
2 Press E to turn pause on.
appears in the display. Play of the
Pause :ON
current track pauses.
• Pressing 5 on the head unit also performs
the same operation.
3 Press e to turn pause off.
appears in the display. Play will
Pause :OFF
resume at the same point that you turned pause
on.
• Pressing ∞ on the head unit also performs the
same operation.
.
on the head unit also
En
Section
08
55