Adjusting Treble; Adjusting Loudness - Pioneer DVH-P7000R Manual De Operación

Audio Adjustments

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and modes, treble adjustment
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press to select
A Treble
Press until appears in the display.
A Treble
• Pressing on the head unit also per-
AUDIO
forms the same operation.
2 Select the desired frequency with
1 or ¡.
Press 1 or ¡ until the desired frequency
appears in the display.
— — — (Hz)
2.5k 4k 6.3k 10k
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Press E or e to adjust the treble level.
Each press of E or e increases or decreases
the treble level. –
+6 –6
is increased or decreased.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
.
is displayed as the level

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press to select
A Loud
Press until appears in the display.
A Loud
• Pressing on the head unit also per-
AUDIO
forms the same operation.
2 Press E to turn loudness on.
Loudness level (e.g.,
Loud Mid
display.
• Pressing 5 on the head unit also performs
the same operation.
3 Press 1 or ¡ to select the level.
Press 1 or ¡ until the desired level appears
in the display.
(low)— (mid)—
Low Mid
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
4 Press e to turn loudness off.
appears in the display.
Loud OFF
• Pressing ∞ on the head unit also performs
the same operation.
.
) appears in the
(high)
High
En
Section
09
65