Section
Audio Adjustments
09
Adjusting source levels
SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the
FM tuner, which remains unchanged.
1 Compare the FM tuner volume level with
the level of the source you wish to adjust.
2 Press
to select
A
Press
until
A
SLA
• Pressing
AUDIO
forms the same operation.
3 Press E or e to adjust the source vol-
ume.
Each press of E or e increases or decreases
the source volume.
•
–
SLA +4
SLA –4
volume is increased or decreased.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Notes
• Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
• The MW/LW tuner volume level can also be
adjusted with source level adjustments.
• Video CD and CD are automatically set to the
same volume adjustment setting.
• External unit 1 and external unit 2 are set to
the same volume adjustment setting automat-
ically.
68
En
.
SLA
appears in the display.
on the head unit also per-
is displayed as the source