Broan best PIK33 Instrucciones De Instalación página 3

- PIK33
Model 647
(7" Round
wall cap)
Model 415
7" Round
adjustable elbow
(optional)
Model 407
(7" Round x 24''
section)
7" Round
metal flexible
duct (optional)
Model 412
transition
(3¼" x 10" to 7")
Adapter and damper 3¼'' x 10''
(supplied with P5 and P8 blowers)
(supplied with P5 and P8 blowers)
ALP36, ALP42,
ALP48, ALP54 or ALP60
Ambient light panel (optional)
(supplied with P5 and P8 blowers)
WCPI
Wall control
(Optional)
RMP Series Backsplash
covering with warming
HL0065
PIK45
AND
INTERIOR BLOWERS
(3¼" x 10" to 8")
Flow deviator
Rough-in kit
Model P5
single-blower
(500 cfm)
(Stainless Steel wall
shelves. Optional)
INSERT SYSTEM
Model 634 or 644
(roof cap)
Model 413
transition
Adapter and damper 3¼'' x 14''
(supplied with P8 blower)
- 3 -
-
8" Round
adjustable elbow
(optional)
8" Round
standard
duct
8" Round
metal flexible duct
(optional)
Model 459
transition
(3¼" x 14" to 8")
L3336S, L3342S, L4548S
L4554S or L4560S
Custom Hood Liner (optional)
PIK33 OR PIK45
INSERT
Model P8
dual-blower (900 cfm)
NOTE: The dual blower P8 must be
installed with 8'' round duct. If it
is impossible to connect the dual
blower P8 to a 8'' round duct,
use a 7'' round duct. In that
case, the blower performance
will be decreased by 25%.
Model 643
(8" Round
wall cap)