Safescan 6155 Manual Del Usuario página 7

English | NEDERLANDS | DEUTSCh | FRANçAIS | ESPAñOL | ITALIANO | PORTUgUêS
5.3.4. COUnTInG COIn ROllS
After counting all loose coins and banknotes the machine starts with counting coin rolls (only when coin packages
are loaded on the machine with the PC software).
PlEaSE nOTE: For accurate counting results it is only allowed to count full packages.
• Remove the coin rolls from the money hook. The machine will automatically switch to the next denomination.
automatic add mode:
Remove the coin rolls from the machine. The machine will make two short 'beeps' to confirm that the counting
result is correctly stored. The machine will automatically switch to the next denomination.
• Use the arrow keys at all times to return to a denomination to add another counting or to skip a denomination.
• Continue counting until all your coin rolls are counted.
5.3.5. COUnTInG BanknOTE PaCkaGES
After counting all coin rolls the machine starts with counting banknote packages. (Only when banknote packages are
Manual add mode:
• Press key to store the counting result. The machine will sound two short 'beeps' to confirm that the counting
result is correctly stored. The
• Remove the banknote packages from the money hook. The machine will automatically switch to the next
denomination.
automatic add mode:
Remove the banknote packages from the machine. The machine will make two short 'beeps' to confirm that the
counting result is correctly stored. The machine will automatically switch to the next denomination.
• Use the keys at any time to return to a denomination, add another counting or skip a denomination.
• Continue counting until all your banknote packages are counted.
5.3.6. VIEw COUnTInG RESUlTS
• When all the money is counted, press the
the denominations and view the quantity and amount stored for each denomination.
• When you are finished viewing, pressing the
counting, use the
Press the key to add the results to the counting results stored in memory.
5.3.7. ClEaR COUnTInG RESUlTS
To clear all counting results press the
is ready to start a new counting session.
To clear the counting result of a single denomination, press
denomination to delete. Press
the count mode.
7
• The machine starts with the smallest coin denomination (i.e. €0.01).
• Place one or more full € 0.01 coins rolls on the money hook.
• Wait until you hear a "beep".
Manual add mode:
• Press key to store the counting result. The machine will make two short
'beeps' to confirm that the counting result is correctly stored.
The symbol will appear on the screen.
loaded on the machine by the PC software).
PlEaSE nOTE: For accurate counting results it is only allowed to count full
packages.
• Use the
• Place one or more banknote packages on the money hook.
• Wait until you hear a "beep".
symbol will appear on the screen.
key to view the counting results. Use the
key again to return to the counting mode. If you wish to continue
to select the appropriate denomination and place the money on the machine.
key. All counting results will be cleared from the memory and the machine
to delete the counting result of the selected denomination. Press
keys to select the banknote denomination (i.e. € 5)
to enter the view mode. Press
keys to skip through
to select the
to return to