Citizen CT-S310II Manual De Usuario página 25

(1) Connector pin configuration
No. Signa l
1 FG
2 DRAWER1
3 DRSW
4 VDR
5 DRAWER2
6 GND
(2) Electric characteristics
1) Drive voltage: 24 VDC
2) Drive current: Approx. 1 A max. (not to exceed 510 ms.)
3) DRSW signa l: Signal levels: "L" = 0 to 0.8 V, "H" = 2 to 3.3 V
(3) DRSW signal
DRSW signal status can be tested with the DLE+ EOT, GS+a, or GS+r
command.
(4) Drive circuit
Cash drawer kick-out connector
CAUTION
Cash drawers 1 and 2 cannot be operated at the same time.
The soleno id used for the cash drawer should be 24 Ω or more. Do not allo w the
electric current to exceed 1 A. Excessive current could damage or burn out the
circuits.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Function
Frame ground
Cash drawer 1 drive signal
Cash drawer switch input
Cash drawer drive power suppl y
Cash drawer 2 drive signal
Signal ground (common gro und on
circuits)
Shielded
Cash drawer open/
close switch
Cash drawer
V10 CONSUMIBLES S.L.
Printer
— 21 —
Connector used:
TM5RJ3-66 (Hiro se) or
equi valent
Applicable connector:
TM3P-66P (Hirose) or
equi valent