Clearing A Cutter Lock (2) - Citizen CT-S310II Manual De Usuario

4.3 Clearing a Cutter Lock (2)

The paper cover is designed to be open ed if the cutter locks by pressing the
cover open lever . If the blade of the auto cutter still rema ins extended, use the
following procedure to clear the locked cutter.
1. Turn off the power.
2. Open the front cover in the directio n of the A arrow.
3. Lift the protective sheet and turn the cutter gear in the direction of arrow B to return
the auto cutter to a position wher e the paper cover can be opened.
Turn the cutter gear until the auto cutter blad e retracts in the directio n of arrow C. If
the blade of the auto cutter does not mo ve when you turn the cutter gear in the
direction of arro w B, turn it in the other directio n.
4. Pull the cover open lever forward and open the pap er cover.
5. Remove whatever caused the cutter to lo ck.
6. Close the front cover.
7. Load a paper roll and close the pap er cover.
8. Turn on the power.
Check that the POWER LED ligh ts.
Protective sheet
Cutter gear
CAUTION
Be sure to turn off the power.
Be careful not to touch the manual cutter while the front cover is open.
Be careful not to touch the opening for the auto cutter while the paper cover is open.
The print head is hot immed iately after prin ting. Do not touch it.
Do not touch the print head with bare hands or metal objects.
If the above proced ure does not retract the auto cutter, contact your Citizen Systems
dealer.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Front cover
Lever switch
V10 CONSUMIBLES S.L.
Paper cover
Cover open lever
— 29 —
Auto cutter blade