Clearing A Cutter Lock (1) - Citizen CT-S310II Manual De Usuario

4.2 Clearing a Cutter Lock (1)

The ERROR LED flashes and the auto cutter blade remains extended because a
foreign object or paper jam is obstructing it.
If the ERROR LED is flashing, clear the locked cutter as shown below.
1. Turn on the power.
2. Pull the cover open lever forward and open the pap er cover.
3. Remove any jamme d paper includin g any scraps of paper. (Remo ve the pap er roll
that is loaded in the hold er also.)
4. Relo ad the pape r roll and close the paper cover.
CAUTION
The print head is hot immed iately after prin ting. Do not touch it.
Do not touch the print head with bare hands or metal objects.
After doing the pro cedure in "Clearing a Cutter Lock (1)" and then opening the
paper cover, if the blade of the auto cutter is extended, do the procedure in
"Clearing a Cutter Lock (2)".
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 4.3 Clearing a Cutter Lock (2)
— 28 —
V10 CONSUMIBLES S.L.