Manual Setting Of Memory Switches - Citizen CT-S310II Manual De Usuario

5.3 Manual Setting of Memory Switches

Memo ry switches are used to set various printer settings. The memory switches
can be set manually (set by hand on the pri nter) or by comm ands. This section
explains how to perform manual settings.
For informati on on how to set the memo ry switches using commands, please
refer to the Command Reference.
Quick setting mo de
The settings for the memory switches for a replacem ent prin ter's manufacturer,
model, paper width, and character spacing can be set at the same time to the
optimum settings.
Do the settings while confirmi ng the selected items on the printout.
1. Load paper.
2. While the pap er cover is open, press and hold the FEED button while turning the
power on.
3. Press the FEED button three times and close the pap er cover.
The printer enters memo ry switch quick setting mo de.
The selectable item "Mod el" an d the selection are prin ted.
4. Press the FEED button.
A selection is prin ted in order throu gh the cycle each time the FEED button is pressed.
Press the FEED button until the selection you want is pri nted.
5. Press the FEED button for at least two seconds.
The selection is set.
If there is another selectable item, it and the selection are printed.
6. Repeat steps 4 and 5 to select and set the prin ter's mo del, pap er width, character
spacing.
When all the items are set, "Save To Memory" is prin ted.
7. Press the FEED button for at least two seconds.
The changed memo ry switch settings are saved and a list of them is printed.
The printer exits quick setting mod e when prin ting is finished.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Selectable item
V10 CONSUMIBLES S.L.
Selection
— 36 —