Operating Precautions For Serial Interface - Citizen CT-S310II Manual De Usuario

The status disp lay for various messages is shown below.
Status
Paper-end
Paper cover open or front
cover open
Paper cover open or front
cover open
Cutter locked
Memo ry error
Print head hot
Low-voltage error
High -voltage error
Waiting for macro to execute
Power Save Mode
Notes:
*1: If the paper cover or front cover is open in standby.
*2: If the paper cover or front cover is open when printing or feeding paper.
*3: Buzzer sounds when MSW5-1 (buzzer setting) is set to ON. However, the conditions under which
the buzzer soun ds vary depend ing on the settings of MSW6-1 and MSW10-6.

4.7 Operating Precautions for Serial Interface

White stripes may appear in the printout or the paper may not feed, depending
on the printing conditions, when using a serial interface. To prevent this, change
the memory switch settings shown as below.
1. Increase the tran smissio n speed of the MSW7-1 (serial port).
2. Lower the MSW10-2 (print speed) level.
CAUTION
The transmission speed of the serial interface, ambien t temperature, print data duty,
and other printing conditions may cause these prob lems even after doing the above
settings.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
POWER LED
(green)
Lights
Lights
*1
Lights
*2
Lights
Lights
Lights
Lights
Lights
V10 CONSUMIBLES S.L.
ERRO R LED
— 33 —
Buzzer
(red)
Lights Yes
Lights No
Yes
Yes
— Yes
Yes
Yes
Yes
—
— —
*3