SATA AE1015 Manual De Instrucciones página 58

Fig7-13
Tighten the screws on the auxiliary arm with 10# internal hexagon
wrench as shown in Fig. 7-13;
Fig. 7-15
Conduct the centering commissioning for the installed auxiliary arm. As shown in Fig. 7-15, 1 is used to adjust the elevation; and 2 is used
to adjust the left or right side and the locking distance. Place the accessory on the bracket behind the cabinet against the tire plate and
centering tweezer for convenience as shown in Fig. 7-16.
58
AE1015/AE1015-3/AE1015H/AE1015H-3
中文
EN
Fig. 7-14
connect the PU tube on the auxiliary arm to the tee below the oil-
water separator as shown in Fig. 7-14.
Fig. 7-16
DE RU KO PT JA ES