Ec Declaration Of Conformity - Worx WX80RS Traducción De Las Instrucciones Originales

PLUG REPLACEMENT
If you need to replace the fitted plug then
follow the instructions below.
ImPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected to
the terminal which is marked with N. The wire
which is colored brown must be connected to
the terminal which is marked with L.
WARNING: Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved 13ABS1363/A plug and the
correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Reciprocating saw
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
EC DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Reciprocating saw
Type WX80RS(RS - designation
of machinery, representative of
Reciprocating Saw)
Function cutting various material
Complies with the following Directives,
EC Machinery Directive
2006/42/Ec
EC Electromagnetic Compatibility Directive
2004/108/Ec
Standards conform to:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-11
The person authorized to compile the techni-
cal file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 152,Leeds,LS10 9DS,UK
2012/05/23
Leo Yue
POSITEC Quality Manager
11
EN