MBM BRG78A Manual De Uso E Instalación página 46

ghly clean all the inside and outside
parts of the appliance.
Wait for the temperature of the ap-
pliance and all its parts to cool off,
so that the operator is not burnt.
DAILY CLEANING
liquid detergent on the whole surface
(cooking compartment, lid and all
exposed surfaces) and using a non-
abrasive sponge, clean the entire
appliance thoroughly by hand.
When finished, rinse abundantly with
tap water (do not use pressurised and/
or direct water jets).
Have water flow out of the cooking
compartment using the movement
system. Move the cooking compartment
only after having positioned an
appropriate recipient below the drainage
gate valve to carry out drainage.
Fill the recipient halfway to handle
it safely. Empty the container in
compliance with waste disposal
procedures in force in the country where
the appliance is used and reposition the
emptied recipient in its housing.
Repeat the aforementioned operations
until the cooking compartment is empty.
When these operations have been
performed successfully, dry the cooking
compartment carefully using a non-
abrasive cloth.
In order to eliminate all humidity, once
routine cleaning has been finished, turn
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
Remove everything
f r o m t h e c o o k i n g
compartment.
U s e a s t a n d a r d
sprayer to apply the
the appliance on and run it at minimum
for approximately 2/3' and then turn
it back off (see procedure part 3
Instructions for use: Switching On/Off).
If necessary, repeat the operations
described above for a new cleaning
cycle.
CLEANING FOR PROLONGED
DEACTIVATION
See chapter 5 / Daily decommissioning
/ Prolonged decommissioning.
Air out the appliances and rooms
regularly
SUMMARISED TABLE:
QUALIFICATION - OPERATION -
FREQUENCY
Before proceeding with the ope-
rations, see chap.2 "Duties and
qualifications"
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical mains
and shut all the supply valves. Then
contact authorized customer service.
The authorized maintenance tech-
nician intervenes when the generic
operator was not able to pinpoint the
cause of the problem, or whenever resto-
ration of correct operation of the applian-
ce entails executing operations for which
the generic operator is not qualified.
- 20 -
MAINTENANCE