Siemens SIMATIC NET SCALANCE X-300 Manual De Configuración página 369

● Warning: ring ports have different load limits configuration.
● Enter fault state: port <número de puerto> enabled for link status monitoring and link
● Leave fault state: port <número de puerto> disabled for link status monitoring.
● Enter fault state: power line <ID de la fuente de alimentación> enabled for power
● Leave fault state: power line <ID de la fuente de alimentación> disabled for power
● <CLI | WBM | SSH>: Authentication failure.
● Warning: OSPF consumed too much memory and is shut down.
● Duplicate IP address <dirección IP> sent from <dirección MAC>
● IN <número de la entrada digital> (<nombre de la entrada>) <high o low>
● VRRP: Virtual Router <número del router> on VLAN <ID de VLAN> transitioned to
● PNIO configuration invalid, conflict with standby.
● PNIO configuration invalid, conflict with HRP.
● PNIO configuration invalid, conflict in MRP ring ports: <causa del conflicto>
● PNIO configuration invalid, conflict in alternative redundancy configuration.
● PNIO configuration invalid, conflict detected: <descripción del conflicto de configuración>
SCALANCE X-300 / X-400
Manual de configuración, 04/2013, C79000-G8978-C187-19
down.
monitoring and power down.
monitoring.
<Master | Backup | Disabled | Initialize | Invalid> state.
D.1 Mensajes de error del SCALANCE X300 / X400
Anexo D
369