Metabo HPT C 12FDHB Instrucciones De Seguridad Y Manual De Instrucciones página 31

Fence
Fig. 34-a
9. How to use the dust bag (Standard accessory)
Dust bag
Duct
Right angle
Fig. 35
10. Connecting the dust extractor (Sold separately) (Fig. 36)
Dust extractor
Hose (id 38 mm)
Dust collection adapter
(Optional accessory)
Adapter (Dust extractor's
standard accessory)
Joint (C) (Optional accessory)
Hose band
(Optional accessory)
(1) Connect in order of hose (id 38 mm × 3 m long) and adapter (Dust extractor's Standard
accessory) joint (C) (Optional accessory) and dust collection adapter (Optional
accessory) with the duct of power tool.
Connection is done by pressing in the direction of the arrow. (Fig. 36)
The dust collection adapter (Optional accessory) is fi xed to the duct by a hose band.
(Optional accessory)
OPTIONAL ACCESSORIES...sold separately
• Joint (C) (Code No. 337526)
• Dust collection adapter (with hose band) (Code No. 376291)
Vise assembly
Wood plate
Aluminum sash
Wood plate
(1) When the dust bag has become full of sawdust, dust
(2) During bevel and compound cutting, attach the dust
Base surface
Duct
Fig. 36
Vise assembly
Wood plate
will be blown out of the dust bag when the saw blade
rotates.
Check the dust bag periodically and empty it before
it becomes full.
bag at a right angle to the base surface as shown in
Fig. 35.
Do not inhale the harmful dusts generated in
cutting operation.
The dust can endanger the health of yourself
and bystanders.
Use of dust extractor can reduce dust related
hazards.
By connecting with dust extractor through
adapter, joint and dust collection adapter,
most of dust can be collected.
Connect the dust extractor with adapter.
English
Clamp
Wood plate
Aluminum sash
Fig. 34-b
31