WIKA A-10 Manual De Instrucciones página 17

Ocultar thumbs Ver también para A-10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9. Specifications
Specifications
Current supply
Settling time per IEC 61298-2
Switch-on time
Ingress protection (IP code) per
IEC 60529
Pin assignment
Short-circuit resistance
Reverse polarity protection
Insulation voltage
Material (wetted)
Material (in contact with the
environment)
Pressure transmission medium
Vibration resistance per IEC
60068-2-6
WIKA operating instructions pressure transmitter, model A-10
Current (2-wire)
Voltage (3-wire)
Ratiometric (3-wire)
Measuring range ≥ 0.4 bar [≥ 5.8 psi]
Measuring range < 0.4 bar [< 5.8 psi]
Measuring range ≥ 0.4 bar [≥ 5.8 psi]
Measuring range < 0.4 bar [< 5.8 psi]
The stated ingress protection only applies when plugged in using mating connectors that have
the appropriate ingress protection.
Angular connector DIN 175301-803 A
Angular connector DIN 175301-803 C
Circular connector M12 x 1
Cable outlet
See product label
S+ vs. 0V
U
vs. 0V
B
No reverse polarity protection with ratiometric output signal
DC 500 V
< 10 bar [150 psi]
≥ 10 bar [150 psi]
≤ 25 bar abs. [400 psi]
Stainless steel 316L
HNBR
PA and PBT
< 10 bar [150 psi]
≥ 10 bar [150 psi]
≤ 25 bar abs. [400 psi]
10 g
1)
20 g (≥ -30 °C [-22 °F])
on request
2)
Signal current, max. 25 mA
8 mA
8 mA
< 1 ms
< 1 min
< 15 ms
< 1 min
IP65
IP65
IP67
IP67
Stainless steel 316L
Stainless steel 316L and PH grade steel
Stainless steel 316L
Synthetic oil
Synthetic oil
Dry measuring cell
EN
17

Publicidad

Tabla de contenido
loading

Tabla de contenido