Memory; Saving Settings In The Memory; Starting The Memory Function; Electronic Clock - NEFF C57W40N3 Instrucciones De Uso

Pausing operation
Press the button to pause operation. Press the
„
continue the operation.

Memory

The memory gives you the option of saving your own settings
and calling them up again. You have two memory locations
available, namely "M1" and "M2". The memory is useful if you
prepare one meal particularly frequently.
In this section, you can read about
how to save the memory
■
how to start the memory
■

Saving settings in the memory

Example: use the "M1" memory location.
Press the main switch.
1.
The symbol lights up. Your appliance is ready for
~
operation.
Press the button for the microwave power setting you require.
2.
The power setting lights up and a suggested cooking time is
displayed.
Set the cooking time using the rotary selector.
3.
Press and hold the button for a few seconds.
l
4.
An audible signal sounds and "M1" appears on the clock
display for the first memory location.
You can select "M1" or "M2" using the programme selector.
Press and hold the l button for a few seconds.
5.
A signal sounds. The setting is saved and can be started at any
time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.

Electronic clock

Your appliance has various clock functions.
In this section, the following are explained:
The clock display
■
how to set the timer
■
how your appliance is automatically switched off (cooking
■
time)
how to set or change the clock.
■
Cancelling the setting
button to Press and hold the
ƒ
the main switch. Or press the
main switch. The setting is cancelled.
Note: You can also store the series of operations option.

Starting the memory function

You can start cooking at any time using the settings saved for
your meal.
Press the main switch.
1.
The
~
operation.
Press and hold the
2.
Select "M1" or "M2" with the programme selector.
3.
Press the
4.
The memory function starts. The cooking time
counting down.
Note: Once operation has started, you can no longer change
the memory location.
Note: Saved settings are retained even after a power cut.
The cooking time has elapsed.
A signal sounds. The memory function has finished. You can
stop the audible signal by pressing the
the button and switch off the appliance at the main switch or
„
make new settings.
Pausing
Press the
suspended. After closing the door, press the
Operation will then continue.
Cancelling the setting
Press the
press the

Clock display

Clock function
Timer
Q
button for a few seconds and switch off
„
button twice and switch off the
„
symbol lights up. Your appliance is ready for
button for a few seconds.
l
ƒ button.
button or open the appliance door. Operation is
„
button twice or open the appliance door and
„
button once.
„
Use
You can use the timer as an egg timer or
a kitchen timer. The appliance does not
switch on or off automatically
x starts
button. Press
ÁÀ
button again.
ƒ
25